Do you have a question about the Honda Outboard Motor BF15A and is the answer not in the manual?
Displacement | 350 cc (21.4 cubic inches) |
---|---|
Horsepower | 15 HP |
Cooling System | Water cooled |
Fuel Delivery | Carburetor |
Ignition System | CDI |
Starting System | Manual or Electric |
Gear Ratio | 2.08:1 |
Trim Positions | 5 |
Lubrication | Wet sump |
Fuel | Unleaded gasoline (86 octane) |
Propeller | 3-blade aluminum |
Gear Shift | F-N-R |
Bore x Stroke | 59 mm x 64 mm (2.3 in x 2.5 in) |
Full Throttle RPM Range | 5, 000-6, 000 RPM |
Dry Weight | 46 kg |
Oil Capacity | 1.1 L |
Alternator | 6A, 12V |
Shaft Length | 15" (Short), 20" (Long) |
Fuel Tank Capacity | 12 L (External tank) |
Exhaust | Through propeller hub |
Essential precautions for safe operation and to prevent injury or damage.
Instructions on setting the correct motor height for optimal performance and cooling.
Procedures for securely attaching the outboard motor to the boat's transom.
Steps to check and maintain the correct engine oil level before operation.
How to check and refill the fuel tank, including fuel type recommendations.
Step-by-step guide for starting the outboard motor, including shift lever and throttle.
How to select forward, neutral, and reverse gears using the control lever.
Guidance on maintaining speed and using the throttle friction knob during cruising.
Step-by-step guide for draining and refilling the engine oil.
Instructions for inspecting, cleaning, gapping, and replacing spark plugs.
How to clean and flush the outboard motor, especially after use in salt water.
Common causes and checks for an engine that fails to start.
Guidance on resolving warranty issues and customer service contact information.