EasyManua.ls Logo

Honda Outdoor Motor BF40A User Manual

Honda Outdoor Motor BF40A
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
pnuew
-rUEkJlU
S,&3UMO
vos/vowscda
YCINOH

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Honda Outdoor Motor BF40A and is the answer not in the manual?

Honda Outdoor Motor BF40A Specifications

General IconGeneral
Displacement808 cc
Full Throttle RPM Range5, 000-6, 000 RPM
HP Rating40 HP
Starting SystemElectric
Cooling SystemWater Cooled
Gear Ratio2.08:1
Trim Range-4° to +16°
LubricationWet Sump
Recommended FuelUnleaded Gasoline (86 Octane)
Gear ShiftF-N-R
SteeringRemote
Bore & Stroke70 mm x 70 mm
Fuel DeliveryProgrammed Fuel Injection
ExhaustThrough Prop Hub
Shaft Length15, 20 inches
Fuel Tank CapacityExternal
Recommended Engine Oil10W-30
Dry Weight96 kg (211 lbs)

Summary

SAFETY

SAFETY LABELS

Warning labels on the outboard motor to alert users of potential hazards.

SAFETY INFORMATION

Important safety precautions for operating the outboard motor and handling fuel.

CONTROLS

TILLER HANDLE TYPE CONTROLS

Description of controls for tiller handle operation, including start button, levers, and grips.

REMOTE CONTROL TYPE CONTROLS

Description of controls for remote control operation, including levers, ignition switch, and emergency stop.

PRE-OPERATION CHECKS

FLUID LEVEL CHECKS

Checking engine oil, fuel level, and fuel recommendations for safe operation.

STARTING THE ENGINE

TILLER HANDLE TYPE STARTING PROCEDURE

Step-by-step guide to starting the engine with a tiller handle.

REMOTE CONTROL TYPE STARTING PROCEDURE

Step-by-step guide to starting the engine with a remote control.

OPERATION

TILLER HANDLE TYPE OPERATION

Operating the outboard motor with a tiller handle, covering gear shifting and cruising.

REMOTE CONTROL TYPE OPERATION

Operating the outboard motor with a remote control, covering gear shifting and cruising.

POWER TRIM/TILT TYPE OPERATION

Using power trim/tilt switches and levers for adjusting motor angle.

MOTOR PROTECTION SYSTEMS

Warning systems for oil pressure, overheat, and over-rev limiter.

MAINTENANCE

ENGINE OIL MAINTENANCE

Procedures for checking, replacing, and recommended oil for the engine.

SUBMERGED MOTOR PROCEDURE

Steps for servicing a motor that has been submerged in water.

TROUBLESHOOTING

ENGINE DOES NOT START

Troubleshooting steps for fuel and electrical issues preventing engine start.

ENGINE STARTS BUT STOPS OR OVERHEATS

Diagnosing issues when the engine stops unexpectedly or overheats.

Related product manuals