Name: Honda Outdoor Motor BF40A
Brand: Honda
Rating: 5 (1 reviews)

To Next Page

To Previous Page

6. OPERATION (POWER TRIM/TILT TYPE)

MOTOR TRIMMED MOTOR TRIMMED

TOO LOW

TOO HIGH

R’OIJGH

MOTOR TRIMMED

WAVES

CORRECTLY

When cruising:

(A) Into a high wind, trim the motor

down slightly to level the bow and

improve boat stability.

(B) With a tail wind, trim the motor

up slightly to raise the bow and

improve boat stability.

trim the motor too low or too

high to avoid an unstable steer-

ing condition.

‘lkim Meter

The trim meter indicates the trim angle of the motor.

Refer to the trim meter, and

press the UP or DN portion of the power trim/tilt switch to adjust. the motor trim

angle to achieve boat performance and stability.

BOW TOO HIGH DUE TO

1. LOAD IN THE REAR

2. MOTOR TRIMMED TOO HIGH

BOW TOO LOW DUE TO

1. LOAD IN THR FRONT’

2. MOTOR TRIMMED TOO LOW

With the motor trimmed low the trim

meter will read as shown. To raise the

bow increase the motor trim angle by

pressing the UP portion of the power

trim/tilt switch.

With the motor trimmed high the trim

meter will read as shown. To lower

the bow decrease the motor trim angle

by pressing the DN portion of the

power trim/tilt switch.

Questions and Answers:

Need help?

Do you have a question about the Honda Outdoor Motor BF40A and is the answer not in the manual?

Honda Outdoor Motor BF40A Specifications

General