▲
▼
▲▼
Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
While ‘‘POSITION SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.
You can customize the MEMORY
POSITION LINK setting in position
setup.
On Touring models
Position Setup
Multi-Information Display
108
INFO button
SEL/RESET button
10/01/26 18:41:51 31SZA620_113
To Next Page
Loading...
