The 7-pin trailer connector is needed
for the trailer lights. To connect the
connector:
Make sure the connector and the
socketarefreeofdirt,moisture,
or other foreign material.
Open the socket lid by pulling it up.
Your vehicle has a class 3 trailer
hitch as standard equipment.
We recommend that you have your
dealer install a Honda wiring harness
and converter. This harness has
been designed for your vehicle.
If you use a non-Honda trailer
lighting harness and converter, you
can get the connector and pins that
mate with the connector in your
vehicle from your dealer.
Since lighting and wiring vary with
trailer type and brand, you should
also have a qualified mechanic install
a suitable connector between the
vehicleandthetrailer.
The jumper harness and trailer
brakefusearestoredintheglove
box.
Also see page for trailer-related
information.
1.
2.
441
On Touring models
Towing a Trailer
Connecting the Trailer Connectors
Towing Equipment
444
TRAILER HITCH
7-PIN TRAILER CONNECTOR
LID
7-PIN TRAILER CONNECTOR
SOCKET
RETAINING
TAB
RETAINING
TAB
7-PIN TRAILER
CONNECTOR
10/01/26 19:40:24 31SZA620_449
To Next Page
