Shutter
II CA type
The ignition switch for this vehicle is
equipped with a shutter. After parking the
vehicle, close the shutter for theft prevention.
#
Close
a
Remove the ignition key from the ignition
switch.
b
Align the projection of the shutter key with
the slot of the shutter, and turn the shutter
key counterclockwise.
u You can also close the shutter by moving
the knob upward without the shutter key.
c
Remove the key.
#
Open
Align the projection of the shutter key with
the slot of the shutter, and turn the shutter
key clockwise.
20230106100355_32K2FD100_eng_BOOK Page 36 Friday, January 06 2023 10:07:46 JST
Operation Guide
33
Shutter key
Ignition
key
Projection
Slot
Close
Open Knob
Close
To Next Page
Loading...
