If the ignition switch is left in the (Off) or
the (Lock) position for more than 10 days,
the anti-theft alarm system will no longer
operate.
When the system is active and the vehicle
receives a signal from pressing the Alarm/
Answer back button, system activation will be
extended for 10 days.
To reset the system, turn the ignition switch
to the (On) position once.
The anti-theft alarm system uses low-
intensity radio waves. It may affect medical
equipment such as a cardiac pacemaker.
When the battery in the vehicle is weak, the
anti-theft alarm system may not function.
#
Setting the Anti-theft Alarm System
a
Turn the ignition switch to the
(Off)
position or the (Lock) position.
b
Press the Alarm/Answer back button. Within
a second, the turn signals blink and the
buzzer rings 1 time. After 2.5 seconds, the
buzzer rings 1 time and the alarm indicator
blinks.The anti-theft alarm system is
activated.
The alarm indicator flashes while the anti-
theft alarm system is activated.
20230106100355_32K2FD100_eng_BOOK Page 48 Friday, January 06 2023 10:07:46 JST
Operation Guide
45
Continued
Alarm/Answer back button
Alarm indicator
To Next Page
Loading...
