Why Honda SH MODE 125 2024 engine will not start?
If your Honda Motorcycle engine won't start, here are a few things to check: * Make sure there is petrol in the fuel tank. * Inspect for a loose battery connection or any corrosion on the battery terminals. * Check the overall condition of the battery. If the PGM-FI malfunction indicator lamp (MIL) is illuminated, it's best to contact your dealer as soon as possible.
How to fix dead battery on Honda SH MODE 125 2024 Motorcycle?
If your Honda Motorcycle battery goes dead, try charging it using a motorcycle battery charger. If the battery doesn't recover after recharging, contact your dealer.
What to do if fuse is blown on Honda Motorcycle?
If a fuse is blown on your Honda Motorcycle, before handling the fuses, consult the section on 'Inspecting and Replacing Fuses'. Always replace a blown fuse with a spare fuse that has the same rating.
What to do if Honda SH MODE 125 2024 engine is overheating?
If your Honda Motorcycle engine is overheating: * Stop the engine using the ignition switch. * Allow the engine to cool with the ignition switch in the Off position. * Check the coolant level in the reserve tank, and add coolant if needed. If you notice a leak, do not start the engine; transport your vehicle to your dealer.
What to do if PGM-FI malfunction indicator lamp (MIL) is on in Honda Motorcycle?
If the PGM-FI malfunction indicator lamp (MIL) illuminates on your Honda Motorcycle, reduce your speed and have your vehicle inspected by your dealer as soon as possible. You can also park the vehicle in a safe place, away from flammable items, and allow it to cool down for at least 10 minutes with the engine off. If the malfunction indicator lamp blinks again when restarting the engine, drive to the nearest dealer at 50 km/h (31 mph) or less.
What to do if ABS indicator is on in Honda SH MODE 125 2024?
If the ABS (Anti-lock Brake System) indicator is illuminated on your Honda Motorcycle, reduce your speed and have your vehicle inspected by your dealer as soon as possible. Additionally, try turning the ignition switch to the Off position, and then back to the On position.
Why Honda SMART Key Indicator does not work properly on my Honda SH MODE 125 2024 Motorcycle?
If the Honda SMART Key indicator on your Honda Motorcycle isn't working correctly, it could be due to strong radio waves or noise affecting the system. Try lightly pushing the ON/OFF button to activate the Honda SMART Key system. If the Honda SMART Key LED doesn't respond, replace the battery. Also, ensure you are using a registered Honda SMART Key. If the system still can't be activated, contact your dealer.
Why Honda SH MODE 125 2024 Motorcycle idling stop indicator does not come on?
The Idling Stop indicator on your Honda Motorcycle may not come on for several reasons: * The PGM-FI malfunction indicator lamp (MIL) might be lit, in which case you should see your dealer. * The battery voltage could be low; try riding the vehicle for a while, then stop the engine and restart it with the start button. * The engine might be cold; warm up the engine. * Ensure you are riding the vehicle at speeds of over 10 km/h (6 mph).
Why Honda SH MODE 125 2024 Motorcycle engine is not stopped by the idling stop system while the idling stop indicator is on?
If your Honda Motorcycle engine isn't stopped by the Idling Stop System even when the indicator is on, make sure the vehicle is completely stopped and the throttle is fully closed.
What to do if Honda SH MODE 125 2024 engine does not start even if the throttle is opened?
If your Honda Motorcycle engine doesn't start even when the throttle is opened, check if the side stand is down, as the Idling Stop system will be cancelled when the side stand is down. Also, examine the battery and battery terminals for any issues such as a low or dead battery, or a loose connection.
General| Starter | Electric |
|---|---|
| Frame Type | Underbone |
| Front Suspension | Telescopic fork |
| Ground Clearance | 135mm |
| Transmission Type | Automatic (CVT) |
| Rear Suspension | Unit swing |
| Fuel System | PGM-FI |
| Transmission | Automatic (CVT) |
Lists codes for different vehicle destinations and their meanings.
General advice for enhancing rider safety and vehicle operation.
Explains the meaning and importance of various labels on the vehicle.
Details essential safety measures for riding and protective apparel.
Outlines the sequence of operations for starting and riding the vehicle.
Describes the vehicle's dashboard instruments, indicators, and controls.
Details the function and operation of various switches on the vehicle.
Explains the features and operation of the Honda SMART Key system.
Details the Idling Stop system, its function, and operation.
Details on using the vehicle's storage compartments like seat, glove box, etc.
Instructions for safely starting to ride the vehicle.
Guidance on proper braking techniques using front and rear brakes.
Troubleshooting steps for when the engine fails to start.
Highlights the necessity of regular maintenance for safety and performance.
Lists recommended maintenance tasks and their intervals.
Explains basic maintenance procedures and safety precautions.
Details on checking and maintaining the vehicle's braking system.
Guidance for issues when the engine fails to start.
Explains specific warning lights and necessary actions.
Guidance on diagnosing and fixing electrical system issues.
Information about the emergency key and Honda SMART Key.
Guidelines for cleaning, polishing, and maintaining the vehicle's appearance.
Location and importance of vehicle serial numbers.
Lists key specifications of the vehicle's main parts.
Provides technical data for maintenance and repairs.
To Next Page
