192
Emergency Gear Selection & Operation
Taking Care of the Unexpected
How to Shift Gears Manually
How to
Shift Gears Manually
If the shift switches do not operate, use the following procedure to
manually select a gear so you may drive the vehicle to a location where
it can be loaded and transported to a Honda dealer.
Turn the ignition switch to the ON ( ) position.
Remove the gear change tool from the storage compartment
(page ).
Remove the seat (page ).
Check the neutral indicator.
If the transmission is in neutral, go to step 5.
If the transmission is not in neutral, remove the left side cover
(page ), use the gear change tool to shift to neutral so you will be
able to start the engine, Refer to
(page ).
Apply the parking brake.
Press the start button to start the engine.
Select the gear you want. For running on level ground: use 3rd or 4th
gear. For mountainous roads: use 2nd or 3rd gear. Refer to
(page ).
Return the gear change tool to the storage compartment.
Install the left side cover.
Install the seat.
Get on the ATV. Ride it at a safe speed to a place where it can be
repaired or serviced.
1.
2.
3.
4.
5.
6.
8.
7.
9.
10.
11.
114
104
106
193
193
０８／０５／０６ １７：３３：１２ ３１ＨＰ７６００ ０２０１
To Next Page
Loading...
Need help?
General
