What to do if Honda Vario 160 2022 Scooter battery goes dead?
If your Honda Scooter's battery goes dead, charge the battery using a motorcycle battery charger after removing it from the vehicle. If the battery does not recover after recharging, contact your dealer.
What to do if the PGM-FI light comes on in my Honda Vario 160 2022?
If the indicator illuminates while riding your Honda Scooter, it indicates a potential serious issue within the PGM-FI system. It's recommended to reduce your speed and have your vehicle inspected by your dealer as soon as possible.
What to do if the ABS indicator light is on for my Honda Vario 160 2022?
If the ABS indicator operates in an unusual way on your Honda Scooter, it indicates a potential serious problem with the ABS. Reduce your speed and have your vehicle inspected by your dealer as soon as possible. If the ABS indicator stays on, your brakes will function as a conventional system, but without the anti-locking feature. Try turning the ignition switch to the Off position, and then to the On position again.
Why is my Honda Vario 160 2022 SMART Key indicator not working?
If the Honda SMART Key indicator is not working properly, it may be due to strong radio waves or noise affecting the system. Check that the Honda SMART Key system is activated by lightly pressing the ON/OFF button on the Honda SMART Key. If the Honda SMART Key LED is red, activate the Honda SMART Key system. If the Honda SMART Key LED does not respond, replace the battery.
What to do if my Honda Vario 160 2022 engine is overheating?
If the engine on your Honda Scooter is overheating and the high coolant temperature indicator comes on, immediately stop the engine using the ignition switch and allow it to cool with the ignition switch in the Off position. Check the coolant level in the reserve tank and add coolant as necessary. If there is a leak, do not start the engine and transport your vehicle to your dealer. If steps 1-4 check normal, you may continue riding, but closely monitor the high coolant temperature indicator.
What does the battery charging condition indicator mean on my Honda Vario 160 2022?
If the indicator illuminates while riding your Honda Scooter, it indicates a condition of low battery voltage or battery performance degradation. Have your vehicle inspected by your dealer.
Why won't the starter motor operate on my Honda Vario 160 2022 Scooter?
If the starter motor does not operate on your Honda Scooter, check for a loose battery connection or battery terminal corrosion and check the condition of the battery.
What to do if the fuel gauge fails on my Honda Scooter?
If the fuel gauge on your Honda Scooter indicates a failure, it means the fuel system has an error. See your dealer as soon as possible.
Why is my Honda Vario 160 2022 SMART Key system not working correctly?
If the Honda SMART Key system does not work properly on your Honda Scooter, check that a registered Honda SMART Key is used, make sure that you do not use a broken Honda SMART Key, and check the battery condition and battery lead in your vehicle.
Why doesn't the idling stop indicator come on for my Honda Vario 160 2022?
If the idling stop indicator does not come on for your Honda Scooter, and the PGM-FI malfunction indicator lamp (MIL) lights, see your dealer. Otherwise, try riding the vehicle awhile, then stop the engine and then restart the engine with start button referring to the starting procedure for standard engine starting. Also, warm up the engine and ride the vehicle at speeds of over 10 km/h (6 mph).
General| Displacement | 156.9 cc |
|---|---|
| Fuel System | PGM-FI (Programmed Fuel Injection) |
| Max Torque | 13.8 Nm @ 7, 000 rpm |
| Transmission | Automatic, V-Matic |
| Front Suspension | Telescopic fork |
| Fuel Capacity | 5.5 liters |
| Seat Height | 780 mm |
| Starter | Electric starter |
| Bore x Stroke | 60.0 mm x 55.5 mm |
| Max Power | 11.3 kW (15.4 PS) @ 8, 500 rpm |
| Front Brake | Disc brake |
| Engine Type | 4-stroke, SOHC, liquid-cooled, single cylinder |
Details country codes for manual variations and illustration basis.
Defines DANGER, WARNING, CAUTION signals and safety labels for hazard awareness.
Guidelines to enhance rider safety, including inspections, fuel safety, and riding practices.
Explains the meaning and importance of various labels and symbols on the vehicle.
Essential precautions for riding, including protective apparel and safe riding habits.
Guidelines for safe riding, covering running-in, braking, ABS, wet conditions, and parking.
Advises against unauthorized accessories and modifications that can compromise safety.
Provides guidelines on carrying loads, including weight limits and securement methods.
Illustrates and identifies the location of key vehicle components and controls.
Explains the motorcycle's dashboard instruments, indicators, and display functions.
Details the function and operation of various switches on the vehicle's handlebars.
Describes the operation and features of the Honda SMART Key system.
Explains the function and activation of the vehicle's anti-theft alarm system.
Details the answer back system for locating the vehicle and confirming immobilizer status.
Explains the idling stop system's function, operation, and indicators.
Provides step-by-step instructions for starting the vehicle's engine.
Guides on starting the vehicle, acceleration, deceleration, and braking.
Instructions on opening and closing the fuel fill cap, and fuel type recommendations.
Details the location, specifications, and usage of the vehicle's USB charging socket.
Information on using the seat, helmet holders, center compartment, and front box.
Highlights the essential role of maintenance for safety, performance, and vehicle longevity.
Details the recommended maintenance intervals and tasks for the vehicle.
Covers pre-ride inspections, replacing parts, battery care, and emergency procedures.
Lists the tools provided with the vehicle for roadside repairs and adjustments.
Provides instructions for removing and installing body components like the battery and fuel tank cover.
Diagnoses and solutions for engine starting issues, covering starter motor and fuel tank checks.
Addresses overheating issues, including coolant levels and radiator hose checks.
Explains the meaning and potential causes of various warning lights on the dashboard.
Troubleshoots issues with the idling stop system, including indicator and engine stop problems.
Addresses scenarios where the engine fails to start despite opening the throttle.
Provides solutions for problems with the Honda SMART Key system, including battery and communication issues.
Instructions on how to unlock the seat using the emergency key.
Procedures for unlocking the ignition switch using the ID number input mode.
Guidance on emergency tyre repair and the risks associated with temporary repairs.
Covers common electrical issues like dead batteries, burned-out bulbs, and blown fuses.
Addresses intermittent unstable engine operation, possibly due to a clogged fuel pump filter.
Details the emergency key and Honda SMART Key functions, care, and ID tag.
Explains ignition switch, odometer, tripmeter, and document bag storage.
Provides guidelines on washing, cleaning aluminium, panels, and exhaust pipe for vehicle care.
Advice on storing the vehicle outdoors and for extended periods, including battery care.
Guidelines for safely transporting the vehicle using trailers or trucks, with tie-down straps.
Promotes environmentally responsible practices, including using sensible cleaners and recycling wastes.
Explains how to locate and record frame and engine serial numbers for registration and parts.
Discusses the use of ethanol-blended fuels and potential effects on the vehicle.
Explains the function of catalytic converters and guidelines for their protection.
Lists key physical dimensions, weights, capacities, and component specifications.
Provides detailed service data including tyre specifications, fluid capacities, and spark plug gaps.
To Next Page
