Need help?Do you have a question about the Honda VT1100C2 and is the answer not in the manual?
Rules for safe motorcycle operation, including pre-ride checks and rider responsibilities.
Details on rear shock absorber adjustment and pin spanner usage for different load conditions.
Information on front brake operation, fluid level checks, and maintenance.
Instructions for checking and refilling the rear brake fluid reservoir.
Guidance on coolant type, mixture, and properties for optimal engine performance.
Procedure for checking coolant level in the reserve tank while the engine is at operating temperature.
Operation of the manual fuel cock and reserve fuel system.
Explanation of automatic fuel system operation for ON and OFF states.
Details on the fuel reserve supply capacity and its use.
Details on ignition switch positions (P, OFF, ON) and key removal options.
Function and operation of the engine stop switch for starting and running.
Description of headlight switch positions (H, P, OFF) and their functions.
Operation of the starter button for engine cranking and starting procedures.
Operation of the headlight dimmer switch for selecting high or low beam.
How to use the turn signal switch to indicate left or right turns.
Instructions for activating the horn button to sound the horn.
Function of the passing light switch for signaling approaching vehicles.
How to engage and disengage the steering lock for security.
A checklist of essential inspections before riding the motorcycle for safety.
Step-by-step guide to starting the engine, including choke usage and preparation.
Recommended maintenance intervals and tasks based on mileage or time.
Procedures for changing engine oil and oil filter, including torque specifications.
Step-by-step guide to removing the front wheel, including safety precautions.
Detailed instructions for safely removing the rear wheel assembly.
How to check front brake pad wear using cutouts.
Procedure for checking rear brake pad wear using cutouts.
Location and procedure for replacing fuses in the fuse box.
Location and procedure for replacing the main fuse.
Steps to replace headlight and position light bulbs.
Procedure for replacing stop and taillight bulbs.
Instructions for replacing front and rear turn signal bulbs.
Steps for replacing the license plate light bulb.
Recommended steps for preparing the motorcycle for extended storage.
Rules for safe motorcycle operation, including pre-ride checks and rider responsibilities.
Details on rear shock absorber adjustment and pin spanner usage for different load conditions.
Information on front brake operation, fluid level checks, and maintenance.
Instructions for checking and refilling the rear brake fluid reservoir.
Guidance on coolant type, mixture, and properties for optimal engine performance.
Procedure for checking coolant level in the reserve tank while the engine is at operating temperature.
Operation of the manual fuel cock and reserve fuel system.
Explanation of automatic fuel system operation for ON and OFF states.
Details on the fuel reserve supply capacity and its use.
Details on ignition switch positions (P, OFF, ON) and key removal options.
Function and operation of the engine stop switch for starting and running.
Description of headlight switch positions (H, P, OFF) and their functions.
Operation of the starter button for engine cranking and starting procedures.
Operation of the headlight dimmer switch for selecting high or low beam.
How to use the turn signal switch to indicate left or right turns.
Instructions for activating the horn button to sound the horn.
Function of the passing light switch for signaling approaching vehicles.
How to engage and disengage the steering lock for security.
A checklist of essential inspections before riding the motorcycle for safety.
Step-by-step guide to starting the engine, including choke usage and preparation.
Recommended maintenance intervals and tasks based on mileage or time.
Procedures for changing engine oil and oil filter, including torque specifications.
Step-by-step guide to removing the front wheel, including safety precautions.
Detailed instructions for safely removing the rear wheel assembly.
How to check front brake pad wear using cutouts.
Procedure for checking rear brake pad wear using cutouts.
Location and procedure for replacing fuses in the fuse box.
Location and procedure for replacing the main fuse.
Steps to replace headlight and position light bulbs.
Procedure for replacing stop and taillight bulbs.
Instructions for replacing front and rear turn signal bulbs.
Steps for replacing the license plate light bulb.
Recommended steps for preparing the motorcycle for extended storage.
General| Engine Type | 1099cc liquid-cooled 45° V-twin |
|---|---|
| Bore x Stroke | 87.5mm x 91.4mm |
| Ignition | CDI |
| Transmission | 5-speed |
| Final Drive | Shaft |
| Rear Suspension | Dual shocks with five-position spring preload adjustability; 3.9 inches travel |
| Rear Brakes | Drum |
| Rear Tire | 170/80-15 |
| Seat Height | 27.2 inches |
| Fuel Capacity | 4.2 gallons |
| Front Suspension | 41mm fork |
| Front Brakes | Single disc |
| Rear Suspension Adjustability | 5-position spring preload |
To Next Page