To Next PageTo Next PageHow to fix Honda Scooter if engine will not start?
If your Honda Scooter's engine won't start, begin by verifying the correct engine starting procedure. Then, ensure that the fuel tank has petrol. Check for a loose battery connection or battery terminal corrosion. Also, check the condition of the battery. If the PGM-FI malfunction indicator lamp (MIL) is illuminated, contact your dealer as soon as possible.
How to revive dead battery on Honda WW125 Scooter?
To address a dead battery in your Honda Scooter: * Charge the battery using a motorcycle battery charger. Remember to remove the battery from the vehicle before charging. * If the battery does not recover after recharging, contact your dealer.
What to do if Honda Scooter engine is overheating?
If the high coolant temperature indicator comes on in your Honda Scooter, immediately stop the engine using the ignition switch and allow it to cool with the ignition switch in the Off position. After cooling, inspect the radiator hose for leaks and check the coolant level in the reserve tank, adding coolant if needed. If these steps check normal, you may continue riding, but closely monitor the high coolant temperature indicator.
Why Honda WW125 SMART Key system does not work?
If the Honda SMART Key system does not work properly, first check that the Honda SMART Key system is activated by lightly pushing the ON/OFF button on the Honda SMART Key. If the Honda SMART Key LED is red, activate the Honda SMART Key system. Check that there is no communication failure in the Honda SMART Key system, especially if strong radio waves or noise are affecting the system. If the Honda SMART Key LED does not respond, replace the battery.
What to do if PGM-FI malfunction indicator lamp is on Honda Scooter?
If the PGM-FI (Programmed Fuel Injection) indicator comes on while riding your Honda Scooter, it indicates a serious problem with the PGM-FI system. Reduce speed and have your vehicle inspected by your dealer as soon as possible.
What does battery charging condition indicator mean on Honda Scooter?
If the indicator comes on while riding your Honda Scooter, it indicates a condition of low battery voltage or battery performance degradation. Have your vehicle inspected by your dealer.
What to do if ABS indicator is on Honda Scooter?
If the ABS indicator operates in one of the following ways on your Honda Scooter, it indicates a serious problem with the ABS. Reduce your speed and have your vehicle inspected by your dealer as soon as possible. If the ABS indicator stays on, your brakes will continue to work as a conventional system, but without the anti-locking function.
What does torque control indicator mean on Honda Scooter?
If the indicator operates in one of the following ways on your Honda Scooter, it indicates a serious problem with the Torque Control. Reduce your speed and have your vehicle inspected by your dealer as soon as possible. Even when the Torque Control indicator is on, your vehicle will have normal riding ability without Torque Control function.
Why idling stop indicator does not come on Honda WW125 Scooter?
When the PGM-FI malfunction indicator lamp (MIL) lights, the Idling Stop system does not operate for protection of the engine. In case of low battery voltage, ride the vehicle awhile, then stop the engine and then restart the engine with start button referring to the starting procedure for standard engine starting. In both cases see your dealer.
General| Fuel System | PGM-FI electronic fuel injection |
|---|---|
| Front Suspension | Telescopic fork |
| Rear Brake | Drum |
| Transmission | Automatic V-Matic |
| Front Brake | Disc |
Explains the meaning of signal words used for hazard identification.
Provides guidelines to enhance riding safety.
Lists precautions to take for safe riding.
Outlines important precautions for riding the vehicle.
Emphasizes the importance of wearing helmets and protective apparel.
Explains the danger of carbon monoxide from exhaust gases.
Warns against riding under the influence of alcohol or drugs.
Advises to pay attention to other vehicles and anticipate actions.
Guidance on actions to take if involved in a crash.
Defines DANGER signal word and its meaning.
Dangers associated with battery handling and safety precautions.
Defines WARNING signal word and its meaning.
Warning about opening the radiator cap when hot.
Defines CAUTION signal word and its meaning.
Details requirements for helmets, gloves, boots, and clothing.
Guidelines for safe braking practices.
Explains the function and limitations of the ABS.
Warns about the risks of using improper accessories or modifications.
Warns about the dangers of overloading or improper loading.
How to apply brakes effectively.
Steps to start the engine.
Explains the ABS indicator.
Explains the PGM-FI malfunction indicator lamp.
Instructions for locking the steering to prevent theft.
Steps to unlock the ignition switch using the Honda SMART Key.
Steps to lock the ignition switch using the Honda SMART Key.
Steps to set the anti-theft alarm system.
Troubleshooting steps for alarm system issues.
How to turn the idling stop system on or off.
How the engine stops via the idling stop system.
Steps to restart the engine after it has stopped.
Requirements for the idling stop system to become ready.
Troubleshooting for when the idling stop indicator doesn't light up.
How to turn the torque control system on and off.
Troubleshooting steps if the engine cannot be started.
Troubleshooting steps if the engine doesn't start.
Warning about using the helmet holder while riding.
Essential checks to perform before riding.
Importance of keeping the vehicle well-maintained for safety and performance.
Information on fuses and how to inspect/replace them.
Instructions and warnings regarding brake fluid.
Schedule outlining required maintenance tasks and intervals.
Safety guidelines to follow when performing maintenance.
Basic principles and practices for vehicle maintenance.
How to check the engine oil level.
Troubleshooting for engine starting issues.
Actions to take if the engine is overheating.
Checks for engine starting issues when starter motor works.
What to do if the PGM-FI MIL indicator is on.
Explains ABS indicator behavior and troubleshooting.
Explains torque control indicator behavior and troubleshooting.
Explains Honda SMART Key indicator flashing and troubleshooting.
Checks for issues when the starter motor does not operate.
Troubleshooting for when the idling stop indicator doesn't light up.
Troubleshooting when engine doesn't stop with idling system active.
Troubleshooting engine start issues with throttle open.
Troubleshooting steps for a dead battery.
Info on Honda SMART Key, its operations, and care.
