What to do if Honda WAVE100 Scooter battery goes dead?
If the battery of your Honda Scooter goes dead, charge it using a motorcycle battery charger. Remember to remove the battery from the motorcycle before charging. Avoid using an automobile-type battery charger, as it can overheat and permanently damage the motorcycle battery. If the battery doesn't recover after recharging, it's best to contact your dealer.
What to do if fuse blows in Honda WAVE100?
If a fuse blows in your Honda Scooter, follow these steps: First, refer to the section on inspecting and replacing fuses. Then, open the fuse box cover and pull out the fuse to check if it's blown. Always replace a blown fuse with a spare fuse of the same rating, found on the reverse side of the battery cover. Finally, close the fuse box cover, install the battery cover, and close the seat.
General| Displacement | 97.1 cc |
|---|---|
| Compression Ratio | 9.0:1 |
| Fuel System | Carburetor |
| Front Suspension | Telescopic fork |
| Rear Brake | Drum |
| Ground Clearance | 135 mm |
| Fuel Tank Capacity | 3.7 liters |
| Engine Type | Air-cooled, 4-stroke, OHC |
| Bore x Stroke | 50.0 mm x 49.5 mm |
| Ignition System | CDI |
| Transmission | 4-speed |
| Front Tire | 70/90-17 |
| Rear Tire | 80/90-17 |
| Starting System | Kick and electric start |
Essential principles and practices for safe motorcycle operation.
Measures and equipment to protect rider and passenger during operation.
Advice on handling the motorcycle in various conditions and situations.
Guidelines on adding accessories and making modifications to the motorcycle.
Step-by-step overview of starting, riding, and stopping the motorcycle.
Explanation of the dashboard indicators, gauges, and handlebar controls.
Procedures for starting the motorcycle's engine, including cold and warm starts.
Instructions on how to properly shift gears while riding and stopping.
Guidance on refuelling the motorcycle and proper storage procedures.
Explains why regular maintenance is crucial for safety and performance.
A detailed schedule outlining required maintenance tasks and intervals.
Basic principles and procedures for performing motorcycle maintenance tasks.
How to check, add, and change the engine oil for optimal performance.
Procedures for inspecting and adjusting brake systems for safety.
Instructions for inspecting, cleaning, lubricating, and adjusting the drive chain.
Common causes and solutions when the motorcycle engine fails to start.
Steps for dealing with a tyre puncture, including repair and wheel removal.
Guidance on diagnosing and resolving common electrical system issues.
Tips and procedures for cleaning, washing, and maintaining the motorcycle's appearance.
Guidelines for properly storing the motorcycle for extended periods.
Instructions on how to safely transport the motorcycle using trailers or other vehicles.
Key physical dimensions and weight specifications of the motorcycle.
Technical data including tyre sizes, pressures, spark plugs, and fluids.
Specified torque values for critical fasteners and components.
To Next Page