Do you have a question about the Honda XR190CT 2017 and is the answer not in the manual?
Engine Type | Air-cooled, 4-stroke, OHC, single cylinder |
---|---|
Displacement | 184.4 cc |
Compression Ratio | 9.5:1 |
Transmission Type | 5-speed |
Final Drive | Chain |
Front Suspension | Telescopic fork |
Rear Brake | Drum |
Seat Height | 825 mm |
Ignition System | CDI |
Rear Suspension | Mono shock |
Front Brake | Disc |
Fuel Tank Capacity | 12 liters |
Essential safety precautions for servicing the vehicle and general workshop safety.
Guidance on effectively using the manual, including understanding safety messages and symbols.
Information on identifying the specific model of the XR190CT-H by code and destination.
Comprehensive list of technical specifications for dimensions, frame, engine, and fuel system.
Detailed torque specifications for fasteners across various motorcycle components.
A catalog of specialized tools required for performing advanced maintenance tasks.
Diagrams showing the correct routing for electrical cables and wiring harnesses.
Periodic maintenance checklist and intervals for the LA type model.
Periodic maintenance checklist and intervals for the U type model.
Procedures for removing and installing body panels such as the drive chain cover and guards.
Instructions for installing the rear carrier and associated mounting hardware.
Details on the installation and torque requirements for the right-side sidestand.
Procedures for front wheel assembly, disassembly, and bearing replacement.
Service instructions for the front fork, including oil seal replacement and fluid specification.
Information on the steering stem assembly, including torque for top bridge bolts.
Guidance on rear suspension component installation and tightening specifications.
Details for the front brake master cylinder assembly and related service points.
Information on the starter motor components and electric starter inspection.
Details on the speedometer VS sensor and its mounting.