To Next PageTo Next Page
Need help?Do you have a question about the Honeywell Home ADEMCO 6150RF and is the answer not in the manual?
General| Brand | Honeywell Home |
|---|---|
| Model | ADEMCO 6150RF |
| Category | Home Safety Product |
| Language | English |
Details the wireless capabilities supported by the 6150RF, including keypads and transmitters.
Outlines auto-enroll, deletion, and default settings for wireless key functions.
Covers on-board relay operation and activation of control panel relays.
Procedure for opening the 6150RF keypad case using release snaps and locking tabs.
Guide for routing control panel wiring through the 6150RF case opening.
Instructions for mounting the 6150RF case back to a wall or electrical box.
Connecting power and data wires from the control panel to the 6150RF terminals.
Connecting wires for the optional relay output to the 6150RF PC board.
Procedure for reattaching the keypad to its case back after wiring.
Local wireless keys can be used regardless of the RF receiver status in the 6150RF.
Enabling the transmitter module in the 6150RF is required for bi-directional devices.
Enable the RF receiver when transmitters are programmed into the control panel.
A user code must be entered into the 6150RF and control panel for local wireless key functions.
Set the House ID if using RF keypads or bi-directional devices with 6150RF as the source.
Details navigation within the 6150RF programming menu.
Using [*] to save and advance, or [#] to erase and re-enter program data.
Enter program mode by pressing keys [1] and [3] within 30 seconds of power application.
Pressing the [9] key initiates the default restore sequence on the keypad display.
Confirm default restoration with [1] or exit without restoring using any other key.
Press [*] to exit the 6150RF Program mode after defaulting.
Setting the 2-digit keypad address for the 6150RF.
Setting the 2-digit receiver address for the 6150RF.
Choosing between System or Local House ID source for RF devices.
Enabling or disabling the RF receiver based on control panel needs.
Enabling or disabling the transmitter module for bi-directional devices.
Enabling or disabling High-Security mode for encrypted wireless keys.
Enrolling wireless key serial numbers automatically into the 6150RF.
Entering a 4-digit user code for wireless key functionality.
Assigning functions to loops 1-4 for wireless key operations.
Programming the on-board relay action for specific wireless key loops.
Entering program mode and selecting the Wireless Key Editing option.
Procedure to delete a wireless key's serial number using specific key presses.
Modifying user codes, loop functions, or relay assignments for existing wireless keys.
Interpreting error messages like Lb, OC, 1C, and E8 for troubleshooting.
Providing solutions for common error messages and their probable causes.
Details the physical size of the 6150RF keypad.
Information on wiring requirements and the operational range of the device.
Voltage, current consumption, and relay specifications for the 6150RF.
Description of the piezo-electric sounder tones for different alarm types.
Statement regarding FCC compliance for Class B digital devices and potential interference.
Compliance statements for FCC Part 15 and Industry Canada RSS210, including operational conditions.
Guidelines for proper disposal of electronic waste and prohibition of reverse-engineering.
Information on obtaining the latest warranty details for the product.
