OWNER’S GUIDE
TheraPro HR90
ELECTRONIC RADIATOR CONTROLLER
1. SCOPE OF DELIVERY
The radiator controller packaging contains:
1. Radiator controller with valve baseplate M30 x
1.5; batteries included
2. Display support
3. Valve adapter type Danfoss RA
4. Screws for securing radiator controller and bat-
tery compartment
Danger of suffocation!
Keep packaging materials away from children.
2. BRIEF DESCRIPTION
With the electronic radiator controller, you can set
your room temperature exactly to your requirements
while allowing you to save energy.
Please note: The HR90 radiator controller does not
directly switch your boiler on/off. It provides local
room temperature control whilst the boiler is running.
The boiler will be switched on/off by other controls
such as timer, thermostat, etc. For use with hot water
and steam systems.
User-friendly
• Large, adjustable display with backlight.
• Convenient programming by removing the
radiator controller from the valve.
• Copy function for transferring the time program to
other HR90 radiator controllers.
Installation
• The radiator controller fits on the most common
radiator valves of the type M30 x 1.5.
• The HR90 is set to factory settings out the box, but
is programmable pre or post mounting.
Features for your convenience
• Individual programs for each day of the week.
• Up to 6 setpoints per day and 3 different
temperatures.
• Holiday, party, day-off, and ECO operating modes
can be set easily.
• Parameters can be set individually, see Section 9.
• Operation lock/child-proofing to protect against
unauthorized operation.
• Copy programs between multiple controllers
Energy saving features
• With the window function, the radiator valve is
closed when ventilating the room.
• In ECO mode, the room temperature is lowered by
5°F.
• Optimized control of the room temperature.
Care of use is required!
Use the radiator controller only in accordance
with these operating instructions.
Do not let children play with the radiator
controller.
To Next Page
Need help?
General
