Honeywell 60S - Troubleshooting and Device Resets; For an Unresponsive or Improperly Responding Handheld; Warm Booting the Handheld; Cold Boot the Handheld

60s Handheld Informaon
5
FOR AN UNRESPONSIVE OR IMPROPERLY RESPONDING HANDHELD
If the handheld does not respond properly, it may need a reboot. Perform a warm boot rst and see if
that xes the problem. If it does not, then perform a cold boot.
WARM BOOTING THE HANDHELD
Press the Blue key and the Power key simultaneously for about 6-7 seconds.
COLD BOOT THE HANDHELD WARNING: THIS WILL REQUIRE A REINSTALL AND RE-SETUP OF
THE HANDHELD
Press the Blue key and the Send simultaneously for about 6-7 seconds.
Send Key
Blue Key
Power Key