Need help?Do you have a question about the Honeywell Dolphin CT60 and is the answer not in the manual?
General| Display diagonal | 4.7 \ |
|---|---|
| External display | No |
| Touch technology | Multi-touch |
| Touchscreen type | Capacitive |
| Display resolution | 1280 x 720 pixels |
| Rear camera resolution (numeric) | 13 MP |
| Flash memory | 32 GB |
| Internal memory | 0.003 GB |
| Internal memory type | DDR4 |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Maximum memory card size | 512 GB |
| Processor family | Snapdragon |
| Processor frequency | 2.2 GHz |
| Processor manufacturer | Qualcomm |
| Storage temperature (T-T) | -30 - 70 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| GPS receiver | GNSS |
| Battery voltage | 3.6 V |
| Battery capacity | 4040 mAh |
| Battery life (max) | 12 h |
| Bundled software | Honeywell Utilities and Demos |
| Operating system version | 7.1.1 |
| Operating system installed | Android |
| Data network | EDGE, GPRS, GSM, HSPA+, LTE, UMTS |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Bluetooth version | 5.0 |
| Bluetooth profiles | A2DP, AVRCP, GATT, HFP, OPP, PBAP, SPP |
| GSM bands supported | 850, 900, 1800, 1900 MHz |
| Security algorithms | EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, WEP, WPA, WPA2 |
| RFID reader | - |
| VPN support | IPSec V4/L2TP, PPTP |
| Product color | Black |
| Linear (1D) barcodes supported | Codabar, Code 11, Code 128, EAN-13, EAN-8, GS1 DataBar Expanded, GS1 DataBar Omnidirectional, GS1-128 (UCC/EAN-128), Interleaved 2 of 5, MSI, Telepen, Trioptic, U.P.C. |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Codablock, Data Matrix, Dot Code A, Grid Matrix Code, Han Xin, MaxiCode, MicroPDF417, PDF417, QR Code, TLC-39 |
| Harmonized System (HS) code | 84713000 |
Weight and Dimensions| Depth | 82.5 mm |
|---|---|
| Width | 160 mm |
| Height | 19 mm |
| Weight | 350 g |
Information on obtaining technical assistance and product service.
Details on battery, charging, replacement, and status indicators.
Essential safety guidelines for handling, charging, and disposing of the battery.
Steps to power on, set up, and unlock the device.
Using the imager as a scanner and the scan wedge feature.
Modifying settings for barcode scanning, symbologies, and decode options.
How to scan barcodes and use the Scan Demo app.
Activating UMTS/CDMA phone features and managing network carriers.
Procedures for making calls, answering, and handling incoming calls.
Making emergency calls and configuring phone settings.
Using the camera for photos/videos and controlling zoom.
Steps to reboot, perform Enterprise, and Factory data resets.
To Next Page
