Honeywell Dolphin CT60 - Change the Battery Status LED Behavior

Dolphin CT60 Mobile Computer 7
Change the Battery Status LED Behavior
You can change the behavior of the Battery status LED if the out-of-box behavior
for a charging battery (blinking green) is not acceptable to your environment.
You can choose one of three options:
• Default Battery LED
• Honeywell Battery LED (out-of-box setting)
• No Battery LED
Use the Default Battery LED setting if you want the status LED to turn on steady
amber and then steady green when charging. To learn more about this option, see
Default Battery LED Descriptions.
Select the No battery LED setting if you want to use the LED as a notification LED
for applications or device management solutions. For more information on how to
use the LED as a notification LED, see
http://developer.android.com/guide/
topics/ui/notifiers/notifications.html
.
Default Battery LED Descriptions
To change the battery status LED behavior:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Battery LED.
3. Choose one of these options:
• Default Battery LED
• Honeywell Battery LED (out-of-box setting)
• No Battery LED
Connected to Power LED State Description
No Blinking red Battery level is below 15%
No Off Battery level is 15% or more
Yes Steady red Battery level is below 15%
Yes Steady amber Battery level is between 15% and 90%
Yes Steady green Battery level is 90% or more