Dolphin CT60 Mobile Computer 13
Adjust Speaker Volume
Use the volume buttons on the right side of the computer to adjust the volume of
ringtones, media, notifications or alarms.
1. Press either the Volume Up or Volume Down button. The volume slider
appears.
2. Tap the down arrow to expand the options.
Use the stylus or the Volume buttons to adjust each volume type.
• Use the slider for notifications and rings.
• Use the slider for media (e.g., music, videos and other media).
• Use the slider for alarms.
Enable Vibrate Mode
You can use the Volume down button to quickly enable Vibrate mode so the
computer vibrates instead of emitting sound for notifications and rings. If you still
want to hear alarms, turn on the Alarms only feature.
1. Press the Volume down button until the computer vibrates.
2. To turn on the Alarms only feature, press the Volume Down button again with
the volume slider open.
The status bar at the top of the screen indicates the active mode:
• When Vibrate mode is active, appears.
• When Alarms only mode is active, the Do Not Disturb icon appears.
To Next Page
Loading...
