10 Dolphin CT60 Mobile Computer
Power On the Computer
After you have fully charged and installed a battery, power on the computer for the
first time:
• Press and release the Power button.
Welcome Screen
The first time you power on the computer, a Welcome screen appears. Follow the
prompts on the screen as the setup wizard has you:
• set the default language.
• set up the Wi-Fi network connections.
• set the time, date, and time zone.
• personalize (name) the computer.
• set up security and privacy options.
Once you complete the Setup Wizard, the Welcome screen no longer appears when
you power on the computer and Provisioning mode is automatically turned off
(disabled). Scanning a bar code to install of applications, certificates,
configuration files, and licenses on the computer is restricted. To learn more
About
Provisioning Mode
, see page 70.
Unlock the Screen
The screen lock automatically activates every time the computer is turned on or
when the computer wakes from sleep mode.
• Swipe up from the lock icon at the bottom of the screen.
The level of security provided depends on the type of lock set (e.g., Swipe, Pattern,
PIN, or Password). The default setting (Swipe) provides no protection against
unauthorized access to your computer.
Change the Screen Lock to Protect the Computer
After you start using the computer, you should change the screen lock to prevent
unauthorized persons from accessing the computer without a password, pin, or
pattern to unlock the touch screen once it has been locked.
To Next Page
Loading...
