Honeywell Dolphin CT60 - Phone Activation and Network

Dolphin CT60 Mobile Computer 45
Activate the UMTS Phone
You use a SIM card to activate the UMTS phone on your CT60 WWAN model
computer (CT60L1N). You can purchase the micro SIM card from your network
provider. Dolphin CT60 WWAN models includes two SIM card slots (SIM 1 and SIM
2) for multiple network provider flexibility.
1. Select a network carrier. To learn how, see
Add or Switch Between Network
Carriers
on page 44.
2. Activate and configure the SIM slot you are installing the card in, see
Select a
SIM Card Slot
on page 44.
3. Press and hold the Power button until the options menu appears.
4. Tap Power Off and then OK to verify.
5. Disconnect one end of the hand strap from the computer.
6. Press and hold down the small button on the battery latch, and then slide the
latch toward the bottom of the computer to unlock the battery.