Need help?Do you have a question about the Honeywell Dolphin CT50 and is the answer not in the manual?
General| Display diagonal | 4.7 \ |
|---|---|
| Display resolution | 1280 x 720 pixels |
| Speakers | stereo |
| Flash memory | 16 GB |
| Internal memory | 0.002 GB |
| Internal memory type | - |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, SDIO |
| Maximum memory card size | 32 GB |
| Processor family | Qualcomm |
| Processor frequency | 2.26 GHz |
| Storage temperature (T-T) | -30 - 70 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| GPS receiver | GNSS |
| Battery capacity | 4040 mAh |
| Battery life (max) | 12 h |
| Bundled software | Honeywell Powertools and Demos |
| Operating system installed | Windows Embedded 8.1 |
| Data network | 2G, 3G, 4G, EDGE, GPRS, GSM, HSPA+, LTE, UMTS |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Bluetooth version | 4.0 |
| Security algorithms | EAP, WEP, WPA, WPA2 |
| Product color | Black, Grey |
| International Protection (IP) code | IP67 |
| Rear camera resolution (numeric) | 8 MP |
Weight and Dimensions| Depth | 160 mm |
|---|---|
| Width | 82.5 mm |
| Height | 19 mm |
| Weight | 342 g |
Information on obtaining service and repair for Honeywell products.
Details on the warranty terms and conditions for the device.
Instructions on how to provide feedback on the user manual.
Information on the device's compatibility with hearing aids.
Overview of the Dolphin CT50 Mobile Computer's key features and specifications.
Details on the rechargeable battery, its capacity, and factors affecting life.
Explains the meaning of different colors and states of the battery status LED.
Guide to checking battery status and configuring battery saver options.
Tips and recommendations for maximizing battery life and proper storage.
Important safety guidelines and recommendations for battery usage and handling.
How to enable Airplane mode to turn off all radios and save battery power.
Step-by-step guide for initial setup and powering on the CT50.
Instructions on how to turn the computer on, off, and into sleep mode.
How to put the computer into sleep mode or wake it up.
Procedure for unlocking the computer's screen after powering on.
Steps to set a PIN for securing apps and data on the computer.
Instructions on how to operate the touch screen effectively while wearing gloves.
Explanation of the Good Read LED and its function related to scanner feedback.
How to adjust the screen backlight intensity for readability and power saving.
Guide to configuring ringer volume, notification sounds, and other audio preferences.
Detailed steps for inserting a microSD card to expand storage capacity.
Overview of methods for transferring files between the CT50 and a PC.
Description of the Windows 10 IoT Mobile Enterprise user interface.
Managing tiles, customizing the layout, and understanding the start screen.
Explanation of the front panel and side buttons used for navigation and functions.
Details on touch gestures like tap, drag, swipe, double-tap, and pinch for interaction.
How to access and use the Action Center for notifications and quick settings.
Steps to personalize the Start screen by arranging, resizing, and grouping tiles.
Instructions for manually setting or automatically updating the device's date, time, and time zone.
How to find detailed information about the device's software and firmware versions.
How to access detailed hardware specifications and diagnostic information.
Overview of pre-installed Honeywell applications for troubleshooting and connectivity.
Description of the scanner's capabilities and how to scan bar codes.
Details on the ScanDemo application for demonstrating scanner functionality.
Step-by-step guide on how to scan bar codes using the device.
How to configure scanner behavior like vibration and sound for good reads.
How to enable or disable specific bar code symbologies for decoding.
Information on profile settings for the ScanDemoW10 application.
Explanation of Wedge Mode and its profile commands for scanner behavior.
Guidance on creating custom scanner configuration profiles.
Overview of the phone features, network types, and Bluetooth headset support.
Instructions for activating the UMTS phone service using a SIM card.
Steps to activate the CDMA phone service with a wireless carrier.
How to initiate phone calls using the device's phone functionality.
How to receive and answer incoming phone calls on the device.
How to make emergency calls, even without service or a SIM card.
Details about the 8-megapixel color camera for photos and videos.
How to adjust camera and video settings for optimal results.
Step-by-step instructions for capturing still images with the camera.
Step-by-step instructions for recording video clips with the camera.
Introduction to configuring various computer parameters and settings.
How to access and open the main Settings application on the device.
Overview of connecting to wireless and wired networks (802.11, Ethernet, Bluetooth, NFC).
Guide to connecting the device to available Wi-Fi networks.
Instructions for connecting to Wi-Fi networks that are not broadcast.
Manually selecting channels for 802.11 radio communication.
Configuring settings for seamless Wi-Fi roaming between access points.
Instructions for connecting the CT50 to an Ethernet network using a dock.
Steps to create a VPN profile for secure network connections.
Overview of wireless security solutions like WPA2, WPA, 802.1x, LEAP, and WEP.
Information on installing and managing digital certificates for secure communications.
Steps to install digital certificates via the Microsoft Edge browser.
Steps to install digital certificates attached to email messages.
Guide for administrators to install certificates using Mobile Device Management (MDM).
Information on enabling and managing Bluetooth connectivity for device pairing.
Step-by-step guide to pairing the CT50 with Bluetooth devices.
Instructions on how to disconnect a previously paired Bluetooth device.
Information on connecting the device via serial or USB using various accessories.
Details on NFC technology and its modes of operation (tag reader/writer, P2P).
Instructions for updating the device's firmware using a microSD card.
How to use the Ping utility to test network connectivity and troubleshoot issues.
How to view IP parameters and network adapter details using IPConfig.
Viewing and editing network routing rules using the Route app.
Methods for restarting or rebooting the computer to resolve issues.
Steps for performing a clean boot to restore factory defaults and troubleshoot.
How to reset the device to its original factory settings.
Recommended methods for cleaning the device's screen, scanner, and camera.
Detailed physical dimensions, weight, and environmental ratings of the CT50.
List of world-wide languages supported by the device.
List of all 1D, 2D, and postal bar code symbologies supported by the CT50 scanner.
Guaranteed and typical reading distances for various symbologies and focus points.
To Next Page
