Chapter 6 — Configure the Computer
Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide 63
Add a VPN Profile
Before you can connect to a VPN, you must add VPN information.
1 Tap All Apps > Settings > Network & Wireless > VPN.
2 Tap to Add a VPN connection.
3 From the VPN provider box, select a provider from the drop-down
list.
4 In the Server name or address box, type the server name or IP
address of the VPN server.
5 In the VPN type box, choose Point to Point Tunneling Protocol
(PPTP), L2TP/IPsec with certificate, L2TP/IPsec with pre-shared
key, or IKEv2.
The VPN service provider only appears in the options if you have
already downloaded and installed the service provider app. If
necessary, you can touch the link under the Type box to connect and
download an SSL VPN app from the Windows Store.
6 Select the Type of sign-in info required to connect to the VPN
server and then type the required information.
7 (Optional) Type a User name and Password.
8 Tap Save. The VPN connection appears on the screen.
About Wireless Security
The computer provides these security solutions for your wireless
network:
• Wi-Fi Protected Access 2 (WPA2™)
• Wi-Fi Protected Access (WPA)
• 802.1x
• LEAP
• WEP
Honeywell recommends WPA2 security with PSK (Personal) or 802.1x
(Enterprise) key management.
Before you set security, you need to enable the radio, set the date, and
set the SSID on your computer. To use 802.1x security, you need to load
a root certificate on your computer. To use transport layer security (TLS)
with 802.1x security, you also need to load a user certificate.
Use the Settings app to access and configure all wireless security
settings.
To Next Page
Loading...
