Chapter 7 — Manage and Maintain the CT50
74 Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide
Clean the Computer
To keep the computer in good working order, you may need to clean the
scanner window, color camera window, and the touch screen. Clean the
windows and the touch screen as often as needed for the environment in
which you are using the computer. To clean the computer, use one of
these recommended cleaning agents:
• Acetic acid, 10% in water
• Ethyl alcohol, 10% in water
• Mild soap solutions
1 Press the Power button to suspend the computer.
2 Dip a clean cloth towel in the cleaning agent and wring out the
excess.
3 Wipe off the scanner window, camera lens, and flash area. Do not
allow any abrasive material to touch these surfaces.
4 Wipe dry.
5 Let the computer completely air dry before using again.
Caution: There are no user-serviceable parts inside the computer.
Opening the computer will void the warranty and may cause
damage to the internal components.
Note: Honeywell recommends that you must leave the battery installed
when you clean the computer. Leaving the battery installed helps prevent
fluids from entering the computer through the SIM card and microSD
card connectors.
To Next Page
Loading...
