Honeywell Dolphin CT50 - Use Gloves with the Touch Screen; About the Good Read LED

Chapter 1 — About the Computer Features
16 Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide
Use Gloves with the Touch Screen
You can use many off-the-shelf gloves, including leather, when operating
the touch screen on the computer. The gloves can be up to 2 mm (0.08
inches) thick. Use this procedure to set the touch screen to “glove mode.”
1 Press the flat part of the gloved finger to the touch screen.
You want to have approximately 13 mm (0.51 inch) surface area
touching the screen, almost as if taking a fingerprint.
2 Tap the screen subsequently to use it with your gloved hands.
3 Exit “glove mode” by tapping the screen with your bare finger.
About the Good Read LED
The Good Read LED indicates the status of the scanner. For more
information on how to scan bar codes, see “Scan a Bar Code” on
page 34.
Good Read LED Descriptions
LED Color Description
Green Good read of a bar code.
Blinking green The data collection engine is processing or starting up.
Good Read LED