Honeywell Dolphin CT50 - Available Profile Commands

Chapter 3 — About the Scanner
Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide 41
<?xml version="1.0"?>
<ConfigDoc flags="000" name="Data Collection Profiles" desc="Profiles used for
scanner configuration via POS Scanner API">
<HHPReserved>
<Key name="EXMVersion">1.0.1</Key>
<Key name="ContentVersion">1.0.0</Key>
</HHPReserved>
<Section flags="000" name="C39 Internal Scanner" id="C39">
<Key cmd="DEVICE" desc="Specifies the scanner type" list="Internal,USB"
name="Device Type">Internal</Key>
<Key cmd="TYPE" list="Incremental,Full" name="ProfileType">Full</Key>
<Key cmd="APPLY" list="true,false" min="" name="ApplyProfileOnLoad">false</Key>
<Key cmd="DEC_CODE39_ENABLED" list="true,false" name="Code 39 Enable Symbology"
id=
"Enable" gr="flag">true</Key>
<Key cmd="DEC_CODE39_MIN_LENGTH" name="Code 39 Minimum Character Length"
id="MinLength" min="0" max="48">3</Key>
</Section>
<Section flags="000" name="HONWedge" id="WedgeConfig">
<Key cmd="DEVICE" list="Internal,USB" name="Device Type">Internal</Key>
<Key cmd="TYPE" list="Incremental,Full" name="ProfileType">Full</Key>
<Key cmd="ENABLE_WEDGE" list="true,false" name="WedgeEnable">true</Key>
<Key cmd="PREAMBLE" name="Preamble">MyPreamble</Key>
<Key cmd="POSTAMBLE" name="Postamble">&#x0d;</Key>
<Key cmd="ENTER_DELAY"
min="" name="Enter Delay">400</Key>
<Key cmd="WEDGE_POWER_TIMEOUT" min="2" max="10000"
name="ImagerPowerTimeout">5000</Key>
<Key cmd="DEC_EAN13_ENABLED" list="true,false" name="EAN13 Enable Symbology"
id="Enable" gr="flag">true</Key>
<Key cmd="DEC_EAN13_2CHAR_ADDENDA_ENABLED" list="true,false" name="EAN13 2 Digit
Addenda (UPC/EAN)"
id="Addenda2Digit" gr="flag">false</Key>
<Key cmd="DEC_EAN13_5CHAR_ADDENDA_ENABLED" list="true,false" name="EAN13 5 Digit
Addenda (UPC/EAN)"
id="Addenda5Digit" gr="flag">false</Key>
<Key cmd="DEC_EAN13_CHECK_DIGIT_TRANSMIT" list="true,false" name="EAN13 Send
Check Character"
id="CheckTransmit" gr="flag"
>true</Key>
</Section>
</ConfigDoc>
Available Profile Commands
Here is a list of the available profile commands you can use when
creating customer profiles:
"DEC_CODE128_ENABLED"
"DEC_CODE128_MIN_LENGTH"
"DEC_CODE128_MAX_LENGTH"
"DEC_GS1_128_ENABLED"
"DEC_GS1_128_MIN_LENGTH"
"DEC_GS1_128_MAX_LENGTH"
"DEC_C128_ISBT_ENABLED"
"DEC_CODE39_ENABLED"