Dolphin CT60 Mobile Computer 15
Insert a microSD Card
You can use a microSD card to increase file storage capacity or to install software.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC memory cards with the computer for maximum
performance and durability.
Note: Format the memory card before initial use.
1. Save your files and close any open applications.
2. Press and hold the Power button until the options menu appears.
3. Tap Power Off and then OK to verify.
4. Disconnect one end of the hand strap from the computer.
5. Press and hold down the small button on the battery latch, and then slide the
latch toward the bottom of the computer to unlock the battery.
To Next Page
Loading...
