EasyManua.ls Logo

Honeywell Dolphin CT60 - Cleaning the Computer

Honeywell Dolphin CT60
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dolphin CT60 Mobile Computer 79
6. Tap Erase Everything. A message appears informing you an Enterprise data
reset is being performed.
Clean the Computer
To keep the computer in good working order, you may need to clean the scanner
window, color camera window, and the touch screen. Clean the windows and the
touch screen as often as needed for the environment in which you are using the
computer. The computer withstands application of the following cleaning agents
when applied to a clean soft cloth and removed immediately with a dry soft cloth:
Acetic acid, 10% in water
Ethyl alcohol, 10% in water
Mild soap solutions
Note: Always leave the battery installed when you clean the computer.
1. Press the Power button to suspend the computer.
2. Dip a clean cloth towel in the cleaning agent and wring out the excess.
3. Wipe off the scanner window, camera lens, and flash area. Do not allow any
abrasive material to touch these surfaces.
4. Wipe dry.
5. Let the computer completely air dry before using again.

Table of Contents

Other manuals for Honeywell Dolphin CT60

Related product manuals