What to do if the Honeywell DOLPHIN 6500 Handhelds Status LED doesn't turn on?
If the Status LED on your Honeywell Handhelds device does not illuminate when you insert a battery pack, check the power connections to the device and ensure the battery pack is properly seated.
General| Display diagonal | 3.5 \ |
|---|---|
| Display resolution | 240 x 320 pixels |
| Display number of colors | 65536 colors |
| Internal memory | 0.128 GB |
| Internal memory type | RAM |
| Compatible memory cards | SD |
| Processor frequency | 0.624 GHz |
| Product color | Black |
| Barcode reader | Yes |
| Operating system installed | Windows CE 5.0 |
| Data network | - |
| Security algorithms | 802.1x RADIUS, CCX v4, EAP, EAP-TLS, EAP-TTLS, LEAP, MD5, PEAP, WEP, WPA-PSK, WPA-TKIP, WPA2 |
| Interface | USB 1.1 |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Battery capacity | 3300 mAh |
| Battery life (max) | 12 h |
| Battery recharge time (on) | 6 h |
Weight and Dimensions| Depth | 83 mm |
|---|---|
| Width | 42 mm |
| Height | 200 mm |
| Weight | 380 g |
To Next Page
