Why does the Status LED light red during charging for Honeywell Dolphin 9900 Handhelds?
If the red Status LED lights up during charging of your Honeywell Handhelds, it could be related to the battery pack. Try charging the battery in a different charging slot to resolve this issue. If the red status persists with the charging slot, the issue may be with the charging circuitry; in this case, attempt charging the battery in another slot.
What to do if the Status LED does not come on when I insert a battery pack in my Honeywell Handhelds?
If the Status LED does not turn on when you insert a battery pack into your Honeywell Handhelds, check the power connections to ensure they are properly connected. Also, verify that the POWER switch is turned ON and the battery pack is correctly seated.
What to do if the Status LED lights red and stays on without a battery in the charging slot for Honeywell Dolphin 9900 Handhelds?
If the Status LED on your Honeywell Handhelds lights up red and stays on even without a battery in the charging slot, it indicates an error occurred during the self-diagnostic test for that charging pocket. Call Honeywell Product Service and request an RMA.
What to do if the Honeywell Handhelds Status LED lights red during charging?
If the Status LED lights up red while charging your Honeywell Handhelds device, try charging the battery in a different charging slot. If the red light persists with the battery pack, the issue lies with the battery. However, if the red light stays with the charging slot, the problem is with the charging circuitry.
How to fix Honeywell Dolphin 9900 when the Status LED does not come on after inserting a battery pack?
If the Status LED doesn't light up after inserting a battery pack into your Honeywell Handhelds device, check the power connections. Ensure the POWER switch is turned ON and that the battery pack is properly seated.
General| Display diagonal | 3.5 \ |
|---|---|
| Display resolution | 240 x 320 pixels |
| Flash memory | 1 GB |
| Internal memory | 0.256 GB |
| Processor frequency | 0.624 GHz |
| Barcode reader | Yes |
| Phone function | No |
| Wireless technology | 802.11 b/g |
| Interface | USB 1.1, RS-232 |
| Headphone outputs | 1 |
| Battery capacity | 2500 mAh |
| Keyboard type | 35 Alpha |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Depth | 53 mm |
|---|---|
| Width | 86 mm |
| Height | 240 mm |
| Weight | 606 g |
Provides an overview of Dolphin Power Tools and their compatibility across different Dolphin terminals.
Lists the essential software requirements for both Dolphin terminals and desktop workstations.
Details the main user interface window for accessing Dolphin Power Tools and its components.
Lists Power Tools that are installed on the terminal but do not appear in the main Power Tools window.
Provides instructions on how to acquire and install upgrades for Dolphin Power Tools.
Explains how to edit and create configuration and registry documents in the EXM file format.
Details how the EZConfig Client decodes bar codes and deploys data to the terminal.
Describes the terminal configuration settings file and its role in system defaults.
Explains how DeviceConfig.exm settings match and interact with the WLAN Supplicant.
Details the structure, sections, and keys within the DeviceConfig.exm configuration file.
Specifies software applications to launch automatically after each hard reset.
Installs CAB files for software applications, enabling them to persist through hard resets.
Instructions on how to initialize and enable the ScanWedge utility for data input.
Details the various configuration sections within the ScanWedge.exm file.
Programs the terminal's LEDs to monitor and indicate battery charge status.
Saves CAB files after manual installation, preserving the original files.
Activates hardware button assignments for launching applications or commands.
Indicates the keyboard's alpha-numeric mode in the Navigation bar.
Toggles the Soft Input Panel (SIP) between enabled and disabled states.
Establishes a Point-to-Point Protocol (PPP) connection with a RAS server.
Performs warm or cold boots on the Dolphin terminal using the touch screen.
Puts the Dolphin terminal into Suspend mode to conserve power.
Provides detailed system information, including firmware and parameters.
Lists the essential items required for the Battery Analyzer Power Tool to function correctly.
Guides the user through the process of analyzing the installed battery's charge cycle.
Lists command line arguments for controlling the Battery Analyzer's behavior and mode.
Provides instructions on using the RegEdit application to modify the terminal's registry.
Explains the File and Edit menus available in the RegEdit window for registry operations.
Describes the process of loading REG files into the terminal's registry.
Details how to export specific registry settings to a REG file.
Guides on exporting the entire current registry to a file for backup purposes.
Explains the options for restoring the terminal's registry from a backup file.
Instructions on how to access the Network Utilities window and its tools.
Displays, releases, and renews IP parameters for on-board network adapters.
Verifies network communication links by sending echo requests to a specific computer.
Allows viewing and editing of rules governing packet routing to various subnets.
Displays information and configures operating parameters for the 802.11 adapter.
Exports radio settings into a RadioSettings.reg file for backup.
Loads radio settings from a RadioSettings.reg file to restore configuration.
Explains how EZMenu formats application windows to display and launch software programs.
Guides on how to modify EZMenu configuration files using EZConfig Editor.
Details the structure of EZMenu configuration files, including Settings and MenuEntries.
Restricts access to Start menu, OK button, and Command bar from application windows.
Adjusts the division of program memory versus file system memory on Dolphin terminals.
Instructions on how to access and use the SetRAM utility to manage memory allocation.
Explains the built-in restrictions and limitations for memory allocation.
Introduces the two print utilities: BTPrint.exe for Bluetooth and IrDAPrintCE.exe for IrDA.
Prints a sample receipt or bar code to a Bluetooth or IrDA printer.
Provides contact information for technical support offices worldwide.
To Next Page
