Honeywell Dolphin 9900 - Opening Ezconfig Editor on the Workstation; Menu and Toolbar Options; File Menu

Dolphin® Power Tools User’s Guide Rev A
8/6/08
2 - 3
Use these files as templates to create new EXM files.
Opening EZConfig Editor on the Workstation
After you complete installation, EZConfig Editor is available on the workstation from the Start menu.
Click Start > Programs > Honeywell > EZConfig Editor > EZConfig Editor.
Menu and Toolbar Options
The menu and toolbar at the top of the window contains many options.
File Menu
Menu Item Description
New
Creates a new document. There are two options:
• Configuration Document - Creates a configuration file;
Creating New Configuration Documents (page 2-15).
• Registry Document - Creates a registry file in the EXM file format;
Registry Documents (page 2-17).
Open
Opens an EXM file located on the workstation.
Open from Device Opens an EXM file located on the terminal. The location of the file appears in the title bar
with the word “[Remote]” to identify that the open file is located on the terminal.
Note: Requires an ActiveSync connection between the workstation and the terminal.
Menu
Too lba r