Honeywell Dolphin 9900 - Formatting Section

5 - 12 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
Formatting Section
ScanWedge supports data formatting.
The Formatting section contains subsections and each subsection supports one data format.
Formatting Subsections
Subsection
Key
Description Default
Value
Available Values
Format Specifies data formatting parameters Empty See Available Data Formatting
Commands on page 5-13.
CodeID Identifies the Code ID that the bar code's
symbology must have for the format to be
applied. The Code ID is a single character that
is case-sensitive; e.g., set CodeID=j to apply
the format to Code 128 only.
Empty Empty=No Code ID
X=See Code ID on page 5-14.
Length Determines the length the bar code data must
have for the format to be applied.
Empty Empty=Format applies to any
length
0=Format applies to any length
X=The length