Honeywell Dolphin 9900 - View Options

Dolphin® Power Tools User’s Guide Rev A
8/6/08
1 - 3
Exiting the Power Tools Main Window
• Scroll down and tap the Exit icon .
• Tap File > Exit (ESC).
• Press ESC on the keyboard.
View Options
The View menu changes the organization of the Power Tools main window and is located at the bottom
of the screen. A checkmark appears next to the selected view.
This menu enables you to choose between:
• Small Icon View
• Large Icon View (Default view)
Network
Utilities
Opens a window that displays the Network utilities:
• IP Config (see page 9-2)
• Ping (see page 9-4)
• Route (see page 9-6)
• WiFi Status (see page 9-10)
• Backup Radio Settings (see page 9-12)
• Restore Radio Settings (see page 9-12)
9-1
RASMan Establishes a remote access service (RAS) connection. 6-10
Reboot Performs a warm or cold boot from the touch screen, as
opposed to the keyboard commands.
6-13
RegBackup Backs up the registry. 8-6
RegEdit Allows you to edit the registry and import and export registry
keys.
8-1
RegRestore Loads the RegBackup file.
8-6
ScanWedge Enables the Dolphin terminal to interpret as keystrokes data
received via the decoder, serial port, or IrDA interface.
5-1
SetRAM Allows you to re-set the memory allocation.
11-1
Suspend Manually puts the terminal into Suspend mode from the touch
screen, as opposed to the keyboard commands or time-out
settings.
6-14
SysInfo Displays system information.
6-15
Icon Name Description Page