Honeywell Dolphin 9900 - Backing Up the Registry; Restoring the Registry

8 - 6 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
Backing Up the Registry
You can export the current registry by tapping the RegBackup icon on the Power Tools Main Window
(see page 1-2) . A _RegBackup.reg file containing the entire registry is created and stored in the
\IPSM\AutoInstall folder.
Because this REG file is stored in the \IPSM\AutoInstall folder, AutoInstall will launch and install this
REG file during the next cold boot.
Restoring the Registry
After you have backed up the registry, a _RegBackup.reg file of the entire registry is stored in the
\IPSM\AutoInstall folder.
You have a number of options to restore the registry by loading the _RegBackup.reg file.
RegRestore
On the Power Tools Main Window (see page 1-2), tap the RegRestore icon .
Tap on the REG File:
Tapping on a REG file in any folder immediately tries to add the information in that file to the registry. A
message appears asking if you want to add the information to the registry. Tap Yes to add the information.
Cold Boot
Because this REG file is stored in the \IPSM\AutoInstall folder, AutoInstall will launch and install this
REG file during the next cold boot.