Need help?Do you have a question about the Honeywell BENDIX/KING KTR 2280 and is the answer not in the manual?
Manual overview, installation, and check out procedures for KTR 2280 MMDR.
Details KTR 2280 APEX MMDR Transceiver, its features, and capabilities.
Lists TSO compliance, environmental categories, dimensions, weight, mounting, and power.
Lists available configurations and installation kit contents for KTR 2280.
Lists items needed for installation but not included with the main unit.
Covers FCC compliance, permits, and aircraft station licenses for the KTR 2280.
Details instructions for maintaining airworthiness and on-condition maintenance.
Guidelines for inspecting wires and coax cables during maintenance.
Warning and guidelines for minimizing RF exposure during antenna installation.
General suggestions and information for KXP 2290 installation.
Instructions for careful unpacking and visual inspection of the unit for damage.
Details unit cooling requirements and air flow considerations during installation.
Information on selecting the optimal location for unit and antenna installation.
Describes the process of mechanically installing the KTR 2280 unit into its rack.
Covers mechanical installation of various antennas.
General guidelines for electrical installation, interconnections, and wiring.
Procedures for verifying system operation and functionality after installation.
Verifies system operation through inspection and functional tests.
Visual checks of equipment, cables, and connections for damage and proper routing.
Functional tests, including interwiring checks, ground, and flight tests.
Overview of the radio tuning philosophy and display interaction.
Description of the Radio Tuning window on the PFD and its controls.
Details the display and controls for VHF COM tuning.
Covers active frequency, volume, soft keys, and annunciators for VHF COM.
Displays detailed COM frequency spacing and active/inactive modes.
Details the display and controls for VHF NAV tuning.
Covers active frequency, volume, soft keys, DME, Morse code, and standby frequency/VOR bearing.
Shows NAV mode selections and access to DME details.
Controls DME association and hold mode for NAV radios.
Details the display and controls for ADF tuning.
Displays ADF mode selection options and controls.
How to operate VHF COM, VHF NAV, and ADF using controllers.
Details the operation of COM controls like DETAIL, COM, Tuning Select, and Frequency Swap.
Details the operation of NAV controls like DETAIL, NAV, Tuning Select, and Frequency Swap.
Details the operation of ADF controls like DETAIL and ADF Detail Window Soft Keys.
Lists environmental test conditions and categories per RTCA/DO-160D.
Details mechanical resonances of the unit under vibration testing.
Records changes and revisions to the environmental qualification form.
Performance of the KA 44B antenna under RF susceptibility testing.
Testing of the KA 44B antenna against HIRF levels for aircraft certification.
Performance of the KA 44B antenna under lightning induced transient tests.
Performance of the KA 44B antenna under lightning direct effects tests.
To Next Page
General
