SWING
Tank Empty
Swing
Press the ''SWING '' button. The indicator light will come
on and the louvers will begin to move from right to left
automatically.
Manually adjust the horizontal louvers to change vertical
airflow.
Low Water Alarm (Will activate in COOL Only mode)
The unit is equipped with a low water sensor. When water in
the tank is below the minimum level, you will hear 10 beeps
and the TANK EMPTY LED indicator will flash continuously. At
the same time, the power to the pump inside the unit will be cut
off to protect the life of the pump.
To disengage the alarm function, turn off the unit from the power
outlet. Fill the tank with water above the minimum level and turn
on the unit.
To turn off the alarm function and continue to use it in FAN
mode, turn off the unit and turn the unit on. If COOL button is
pressed again without filling the tank with water, low water
alarm will activate again.
10
ENG USE & OPERATION
To Next Page
Loading...
Need help?
General
Weight and Dimensions
