CONTROL KNOBS
SPEED / ON - OFF
Connect to the power supply and turn the Speed knob. The fan
will start. Change the speed from 1 for Low to 2 for Medium to
3 High. To switch OFF the unit turn the Speed to "0".
COOL
Turn the Cool knob ON to start the cooling. It takes a few
minutes to obtain the full eect from this mode.
SWING
Vertical Louvers
Turn the SWING knob to 'ON'. The louvers will begin to move
from right to left automatically.
Horizontal Louvers
Manually adjust the horizontal louvers to change vertical airow.
COOL
OFF ON
SWING
OFF ON
10
USE & OPE RATIO N
SPEED
0
3
2
1