To Next PageTo Next PageWhat to do if my Honeywell CO70PE is not cooling and making noise?
If your Honeywell Air Conditioner isn't cooling and is making noise, make sure the COOL function is activated on the remote or control panel. Also, check the water tank and refill it if it's low or empty. If the pump is damaged or there are calcium deposits on the blower, contact the Customer Service Center.
What to do if my Honeywell Air Conditioner has no discharge of air?
If your Honeywell Air Conditioner has no discharge of air, ensure the power cord is properly plugged in and the switch is turned ON. Also, verify that the unit is turned ON by pressing the power button on the control panel or remote control, or by turning the SPEED knob.
How to fix a Honeywell CO70PE Air Conditioner remote control that does not work?
If your Honeywell Air Conditioner remote control isn't working, first replace the batteries with new ones, ensuring they are correctly inserted according to the polarity guide inside the battery compartment. If replacing the batteries doesn't solve the issue, contact the Customer Service Center.
What to do if my Honeywell Air Conditioner unit does not respond?
If your Honeywell Air Conditioner unit isn't responding, try using the remote control to activate it. If the unit responds to the remote, the control panel on the unit may be faulty, and you should contact the Customer Service Center. If neither the remote control nor the control panel works, contact the Customer Service Center.
General| Type | Portable Air Conditioner |
|---|---|
| Cooling Capacity | 7000 BTU |
| Fan Speeds | 3 |
| Operating Voltage | 220-240 V |
| Operating Frequency | 50 Hz |
| Noise Level | 65 dB |
Basic safety precautions when using electrical appliances.
Explains how evaporative cooling works without a compressor.
Guidelines for indoor placement for optimal efficiency and airflow.
Instructions for outdoor use and placement for outdoor models.
Weekly cleaning of the water tank and general maintenance procedures.
Steps for storing the unit properly for extended periods.
Overview of the control panel buttons and display screen icons.
Detailed explanation of each function button on the unit.
Explains how the unit cools and humidifies the room.
Instructions for using the remote control and battery information.
Instructions for filling the water tank manually or via continuous supply.
Step-by-step guide for refilling the water tank manually.
Explains the low water alarm indicator and how to reset it.
Instructions for cleaning and draining the water tank for storage.
How to clean the mesh filter and honeycomb cooling media.
Step-by-step guide to remove filter and media for cleaning.
