Honeywell CS071AE User Manual

3
USER TIPS
EN
Honeywell Evaporative Air Coolers are built to maximize energy efficiency and keep energy costs
low. Warm air is drawn into the cooler and enters the Honeycomb Cooling Media. Water pumped
from the water tank pours over the Honeycomb Cooling Media. As the warm air passes through the
Honeycomb Cooling Media, the water absorbs the heat, naturally cooling and humidifying the air. A
fan propels the cooled air out into the room. This no-compressor system cools naturally, efficiently
and inexpensively.
The recommended maximum relative humidity level is 60% or less, which allows a noticeable
temperature decrease. The temperature will be lower in drier climates because higher evaporation
occurs when the humidity is low.
What is Evaporative Cooling?
Evaporative Air Cooling Mechanism
Honeycomb Cooling Media
Warm Air
Cool Air
Pump
Water
NOTE
When the product is used for the first time the Honeycomb Cooling Media will have an odor which
will dissipate in a few hours or so of initial use.

Honeywell CS071AE Specifications

General

Type	Monobloc mobile air conditioner
Timer type	Digital
Filter type	Carbon
Noise level	- dB
Variable power	Yes
Number of speeds	3
Water tank capacity	7 L
Cooling capacity (max)	- BTU/h
Timer duration (maximum)	7.5 h
Air conditioner functions	Cooling
Cooling capacity in watts (max)	50 W
Cooling capacity in watts (nominal)	- W
Cooling energy efficiency (EER, W/W)	-
Hourly energy consumption (cooling)	- kWh
Product color	White
Suitable for room area up to	9 m²

Weight and Dimensions

Depth	396 mm
Width	244 mm
Height	665 mm
Weight	5900 g
Package depth	430 mm
Package width	270 mm
Package height	705 mm
Package weight	7000 g