4
USE & OPERATION (CONTINUED)
EN
REMOTE CONTROL
TIMER / PRESET
SPEED
SWING
SLEEP / WIND TYPE
POWER
COOL
LIGHT
: Controls the Timer / Preset function for automatic off
: Ultra Low / Low / Medium / High
: Controls the motion of the louvers
: Natural / Sleep / Normal
: ON / OFF
: Evaporative Cooling On / Off
: Display screen light On / Off
• The remote control requires AAA (2 x 1.5V) batteries for replacement.
• Open the battery compartment at the back of the remote control and insert the batteries inside.
Care must be taken to insert the batteries according to the correct polarity (+ / –) markings shown
inside the battery compartment.
• Always point the remote control signal transmitter towards the unit when operating. Make sure that
the signal path is not obstructed.
• Remove the batteries if the unit is not going to be used for an extended period of time.
• Do not drop the remote control.
• Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.
• Do not mix old and new batteries.
• Do not recharge the battery.
• Exhausted batteries are to be removed from the product and safely disposed of as per local
regulations.
• Do not dispose of batteries in fire. Batteries may explode or leak.
WARNING: Caution for ingestion of the small battery. Keep away from children and animals.
NOTE:
To Next Page
Loading...
Need help?
General
