EasyManuals Logo

Honeywell CT45 Series Quick Start Guide

Honeywell CT45 Series
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
12
About the USB Type C Connector
You can use the provided USB cable to charge the mobile
computer from a host device (e.g., laptop or desktop computer).
The connected host device must supply a minimum power
output of 5V, 0.5A to the CT45/CT45 XP or the battery will not
charge.
Turn Power On/Off
The first time you power on the computer, a Welcome screen
appears. You can either scan a configuration barcode or use the
Wizard to manually set up the computer. Once setup is
complete, the Welcome screen no longer appears on startup
and Provisioning mode is automatically turned off (disabled).
To turn the computer on:
•Press and hold the Power button for approximately 3 seconds,
and then release.
To turn the computer off:
1. Press and hold the Power button until the options menu
appears.
2. Touch Power off or Power > Power off depending on your
computer model.

Other manuals for Honeywell CT45 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell CT45 Series and is the answer not in the manual?

Honeywell CT45 Series Specifications

General IconGeneral
BrandHoneywell
ModelCT45 Series
CategoryPDA
LanguageEnglish

Related product manuals