13
Battery Replacement
Before removing the battery, always do one of the following:
• Power off the computer.
• Place the unit in Swap Battery mode (available on CT45 XP
models only).
Swap Battery Mode (CT45 XP Only)
Swap Battery mode places the computer in a low power state so
that the battery can be removed for a short time. This feature is
not available on all models.
To activate Swap Battery mode:
1. Press and hold the Power button until the options menu
appears.
2. Touch Swap Battery and follow the on-screen instructions.
3. Once you replace the battery, press the Power button.
Improper battery replacement or incompatible
device usage may result in risk of burns, fire,
explosion, or other hazard. Dispose of batteries
according to local regulations.
Un remplacement inadéquat de la batterie ou une
utilisation incompatible de l'appareil peut présenter
des risques de brulures, d'incendie, d'explosion ou
d'autres dangers. Jetez les piles en lithium-ion
conformément aux régulations locales.
To Next Page
Loading...
Need help?
General