2
This fan features a fused safety plug which is designed to cut off electric current to the fan if an electrical
fault occurs. Please see below for more information on how to properly use your fan and replace the safety
plug fuse, if needed.
FUSED SAFETY PLUG - FOR US MODELS ONLY
INTRODUCTION
USER SERVICING INSTRUCTIONS
• If your fan loses power and you suspect that the fuse on your fan has blown,
grasp plug and remove from the receptacle or other outlet device. DO NOT
unplug by pulling on cord.
• Slide fuse cover, located on the top of the plug, towards the prongs of the plug.
(Fig. 1)
• Carefully remove the blown fuse and snap a new fuse into place. To reduce the
risk of fire, replace fuse only with 2.5 Amp, 125 volt fuse. Fully close the fuse
door by sliding back into place. (Fig. 2) Discard the blown fuse. The plug should
now be ready for normal use.
• To reduce the risk of fire, DO NOT replace attached plug.
Discard product if the attached plug is damaged.
• If you need further information on how or when to replace the fuse in the safety
plug, please contact Kaz Consumer Relations Department by visiting our
website at www.HoneywellPluggedIn.com/fans or calling 1-800-477-0457.
Helping to create your optimal sleep environment year-round
The DreamWeaver™ Sleep Fan empowers you to design a relaxing, comfortable sleep environment to help
promote a more restorative night’s sleep. Quick tap controls make it easy to change the powerful fan speed
settings even in the dark. Enjoy the pink noise sound blocking benefits year-round with or without a
cooling airflow!
Fig. 1
Fig. 2
To Next Page
Loading...
Need help?
General