Contents
6.4.12 HART Measurement Transmitter (EEx i) via MFE7 Board
(barrier in source mode) 71
6.4.13 HART Measurement Transmitter (EEx d) via MFE7 Board
(redundant, without barrier) – Burst Mode 73
6.4.14 HART Measurement Transmitter (EEx i) via MFE7 Board
(redundant, barrier in source mode) – Burst Mode 75
6.4.15 HART Measurement Transmitter (EEx d) via MFE7 Board
(Multi-Master, without barrier) – Multidrop Mode (from Basic
System 03-25) 77
6.4.16 HART Measurement Transmitter (EEx i) via MFE7 Board
(Multi-Master, barrier in source mode) – Multidrop Mode (from
Basic System 03-25) 79
6.4.17 Gas Meter (Turbine): Encoder Index, 2 LF/HF Sensors (EEx i)
via ExMFE5 Boards 81
6.4.18 Gas Meter (Turbine): Encoder Index, 2 LF/HF Sensors (EEx i)
via MFE7 Board 82
6.4.19 Gas Meter (Turbine) SMRI Bi-directional: 2 HF Sensors, Flow
Direction Detection (EEx i) via MFE7 Board 84
6.4.20 Gas Meter (Turbine) SMRI Bi-directional:
Flow Direction Detection Internal (EEx i) via MFE7 Board 85
6.4.21 Q.Sonic Ultrasound Gas Meter: Serial RS485 (EEx d) via
MFE7 Board 87
6.4.22 Q.Sonic6 Ultrasound Gas Meter: Serial RS485 (EEx d) via
MFE7 Board 88
6.4.23 FLOWSIC600 Ultrasound Gas Meter: Serial RS485 (EEx d)
via MFE7 Board 89
6.4.24 Serial Interface through COM Port (CPU or MSER4-Board) 90
6.4.25 Analog Output over MFA8 Board (0/4 ... 20 mA) 92
6.4.26 Message Output over MFA8 Board 93
6.4.27 Pulse Output over MFA8 Board 95
7 Device Configuration and Commissioning 96
7.1 Device Configuration 97
7.2 Commissioning the Measurement System 98
7.2.1 Checking Device Settings 99
7.2.2 Checking Measurement Input Values 99
To Next Page
Loading...
Need help?
General
