Welcome...
...to the world of high efficiency air cleaning. Your Honeywell electrostatic air cleaner does exactly what its name
suggests - it cleans the air in the duct of tobacco smoke, dust, pollens and the vast majority of other airborne
contaminants that reduce furnace and air conditioner efficiency, stain walls and generally make the room or building a
less comfortable place to live. With this Honeywell electrostatic air cleaner you can expect to enjoy the benefits of clean
air for years to come.
The air cleaner meets all relevant EU Directives.
OPERATING YOUR F50 AIR CLEANER
Your Electrostatic Air Cleaner has one or two cells depending on the model. These instructions apply to all models.
To follow these instructions please refer to the diagram on the inside front flap of this booklet.
Please retain this booklet for future reference.
Set the on-off switch in the power box to ON. The air
cleaner will now operate whenever your furnace or air
conditioning system fan operates
For maximum air cleaning benefit and cleaner air
conditioning coils, leave the air cleaner switch ON at all
times.
When the fan and air cleaner come on the neon indicator
lights.
You may hear a snapping (or arcing) sound occasionally
as the air cleaner operates. This is usually caused by a
larger dust particle and confirms that the air cleaner is
working as it should. To hear the snapping sound,
momentarily press the ‘TEST’ button which is at the
bottom of the door. Use the TEST button at any time to
confirm air cleaner operation.
A wall mounted Performance Indicator unit, which can be
sited in any convenient visible area, monitors your air
cleaner’s performance.
If your air cleaner is equipped with the Performance
Indicator the ‘ON’ LED will be on whenever the air cleaner
is in operation. Of course this tells that the fan is running
too. This option is available to order from your installer or
dealer.
When the fan and air cleaner stop the neon light goes out
(as does the ‘ON’ LED on the remote Performance
Indicator unit). The air cleaner is off until the heating or air
conditioning fan starts again.
2
F50F
1
7
4
6
5
8
3
2
69-1162M
F50F
F50F
To Next Page
Loading...
Need help?
General
