To Next PageTo Next Page
Need help?Do you have a question about the Honeywell FC100A1052 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | FC100A1052 |
| Category | Air Cleaner |
| Language | English |
Explains how the filter traps particulates and allows clean air through the heating and cooling system.
Discusses compatibility with gas, oil, and electric furnaces, and potential issues with heat pumps.
Install turning vanes to distribute airflow equally over the full surface of the upstream side of the media.
The media air cleaner is adaptable to all new or existing forced air heating and cooling systems.
Attach an offset to the elbow if duct connection allows less than 7 in. for mounting.
Wear safety glasses and follow professional safety standards and local codes.
Check components, ensure airflow direction, and choose an accessible location with adequate clearance.
Consider duct transitions and replace filters every six months for optimal performance.
Replace the media filter when pressure drop reaches 0.5 in. w.c. or at least annually.
Explains MERV ratings for particle efficiency based on ASHRAE Standard 52.2-1999.
Provides physical measurements for the air cleaner and replacement filters.
Specifies the operating temperature range for the media air cleaner unit.
Lists the safety and compliance certifications, such as UL 900, Class 2.
