To Next PageTo Next Page
Need help?Do you have a question about the Honeywell F74C Series and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | F74C Series |
| Category | Water Filtration Systems |
| Language | English |
Adhere to all installation instructions for safe and correct use of the appliance.
Use the appliance according to its intended purpose, in good condition, and with regard to safety and risk of danger.
Appliance is for specified applications only; other uses invalidate warranty.
Assembly, commissioning, servicing, and adjustment must be performed by authorized personnel only.
Rectify any safety-influencing malfunctions immediately.
Guidelines for installing the filter combination, including orientation, shutoff valves, access, and pipework.
Step-by-step instructions for assembling the filter, including flushing, connector, and gauge installation.
Methods for routing reverse rinsing water to a drain, including direct connection and container discharge.
Procedure for setting the desired outlet pressure for specific models using the adjustment knob and manometer.
Step-by-step guide for performing manual reverse rinsing of the filter.
Details on the automated reverse rinsing system (Z74A/Z74S) for convenient filter cleaning.
Annual inspection procedure for the pressure reducing valve, checking for leaks and proper function.
Recommended bi-monthly cleaning of the filter via reverse rinsing to maintain performance.
Periodic maintenance (1-3 years) of the pressure reducing valve by an installation company.
Instructions for cleaning the filter bowl and filter, including cautions regarding cleaning agents.
Guidelines for the proper disposal of filter components and materials, emphasizing local recycling requirements.
Common issues and their causes/remedies for FK74C/FKN74C models, including water leaks and pressure loss.
Common issues and their causes/remedies for F74C/FN74C models, including water leaks and pressure loss.
Automated filter cleaning actuator for presettable intervals.
Connector for retrofitting filters and filter combinations.
Available connection sets for solder or threaded connections.
Inlet check valve available in various sizes.
For conversion of fine filters with rotatable connectors into retrofit filter combinations.
