Honeywell FBII CP-220A User Manual

N9624V1 Rev. B 8/98
FBII CP-220A
Central Station Receiver
Hookup and Installation Instructions

Honeywell FBII CP-220A Specifications

General

Brand	Honeywell
Model	FBII CP-220A
Category	Receiver
Language	English

Summary

Section 1: Getting Acquainted

To the New Operator

Introduction for new operators to the Central Station environment and their responsibilities.

What Is a Central Station Digital Receiver?

Explains the function and purpose of a digital receiver in a Central Station, receiving alarm events.

Obtaining Your Access Code

Explains how to find and record the unique 4-digit access code required for CP-220A programming.

Digital Communicators and Communication Formats

Discusses devices that transmit data and various communication protocols used by security systems.

A Close Look at the CP-220

Provides a detailed overview of the CP-220A receiver's features, capabilities, and design.

Gaining Access

Details the steps to access the CP-220A unit for inspection or maintenance by removing covers.

Inspecting the CP-220

Guides on how to visually examine the CP-220A's internal components, circuit boards, and card slots.

Removing the Line Card Retaining Bar

Instructions on how to remove the bar securing line cards for easier access to internal components.

Removing Cards in the CP-220

Steps for safely removing circuit cards from the CP-220A unit by grasping their handles.

Replacing Cards in the CP-220

Describes the procedure for correctly reinstalling circuit cards into the CP-220A unit's slots.

The Front Panel of the CP-220A

Details the controls and indicators on the CP-220A's front panel, including display and keypad.

The Rear Panel of the CP-220A

Describes the various connectors and features found on the rear panel of the CP-220A for external connections.

What Is Programming?

Introduces the concept of programming parameters to customize the CP-220A's operation.

Preparing for Programming

Outlines the necessary preliminary steps before starting the CP-220A programming process.

Programming With No External Connections

Describes programming without making external connections first.

Programming After External Connections Have Been Made

Details programming after all required external connections are established for the CP-220A.

Section 2: Programming the CP-220A Receiver

Introduction

Overview of Section 2, detailing the CP-220A's programming parameters and categories.

Preparation for Programming: No External Connections Made

Steps for preparing to program the CP-220A without external connections connected.

Preparation for Programming: External Connections Have Been Made

Steps for preparing to program the CP-220A after all required external connections are made.

Entering and Using the Programming Mode

Guides on how to enter and navigate the CP-220A's programming mode using the keypad.

Category A: Receiver Operation

Covers parameters related to the basic operation and configuration of the CP-220A receiver.