Need help?Do you have a question about the Honeywell Galaxy TouchCenter Plus and is the answer not in the manual?
General| Display Type | TFT LCD |
|---|---|
| Resolution | 800 x 480 pixels |
| Power Supply | 12 VDC |
| Screen Size | 7 inches |
| Connectivity | Ethernet, RS-485 |
| Compatibility | Galaxy Dimension and Galaxy Flex |
| Communication | RS485, Ethernet |
| Storage Temperature | -20°C to 60°C |
| Power Consumption | 5W |
Lists common trouble icons and their meanings, advising to contact the alarm company for issues.
Procedure to silence alarms, faults, or tampers using the Security icon and PIN.
Guide to setting specific groups within the system, allowing combination sets and unsets.
Procedure to display faults on the screen, take corrective action, and scroll through the fault list.
Instructions for omitting specific zones to set the system with open zones unprotected.
Methods for unsetting the system when entering premises or when already inside.
Step-by-step guide on setting the system using a Prox tag or PIN, including fault handling.
Steps to reset the system after an alarm, fault, or tamper by clearing the cause and using the Reset icon.
Guide to adding a WIFI network connection, including selecting networks or adding a new one.
Steps to add a LAN network connection, including static IP configuration if needed.
Guide to enrolling and viewing up to eight cameras, listing supported models and configuration tools.
Steps for connecting cameras via LAN, applying power, settings, and using the Discover icon.
Recommended settings for cameras: resolution, frame rate, encoding, and channel selection for TouchCenter Plus.
Step-by-step process to add a new user, including name, PIN, user level, and group selection.
Steps to modify an existing user's details, including name, PIN, and user level.
To Next Page
